Image Map

Saturday, July 9, 2011

Meet Mabel, My 1948 Kenmore 117.959

I found her on Craigslist. I wasn't looking for her but ended up taking her home anyway. My new, old sewing machine!  
My 1982 thrift shop Bernina had just sputtered her last breath. She just COMPLETELY conked out. The poor old girl could only take so much abuse, I guess. Well, I haven't given up on her but it will be a little while before I can get her to the shop. I have a feeling it might be a dead motor. I got a lot out of her for my twenty five dollars, poor thing. I made the wedding dress on her without a snag and for that I will be forever grateful.
In the meanwhile, I had been reading on various blogs, particularly, Male Pattern Boldness, about how beautiful the straight stitch of some of the old machines are. No, they don't have the zig zag stitch, but I could always make a clean finished seam which is a lot neater looking.
I found my 1948 Kenmore when I was hunting down vintage patterns on Craigslist. Yes, I am one of those wierdos who doesn't bat an eyelid to drive thirty miles to get some old patterns at a dollar a piece. I once had my mom meet a guy at a gas station in Long Beach to pick up a stash of forties and fifties patterns. Gotta love you mom, and you drove a hard bargain too!
Tom was a retired fireman whose beloved mother had recently died. He was cleaning out his mother's condo for an estate sale. I could tell he was bereft at the loss of his mother, or maybe he was a serial killer waiting for his next victim? He told me about the machine, but I passed on trying it out because  my baby was sleeping in the car. I had him bring the patterns outside to the curb so I could look through them. Of course, it turned out he was as nice as could be but you never can be too careful when buying things off Craigslist!
Well, he called back the next week and said he and his wife were still organizing the sale and would I like to try the machine out before the estate sale ? 
I said yes, I would try it out, being curious about these old machines. After about a half hour of reading the manual and trying to figure out how to load the bobbin and thread the machine, I got it running. Tom's mother had been very neat and tidy, the drawers of the desk were well organized, and the notions looked as if they had been just placed there recently, and hadn't been there for years. It was a bit like a time capsule to me. I pressed against the knee pedal. The stitches were beautiful and well aligned. My late model Viking Husqvarna Freesia stitches are not nearly this straight and even. I can finally topstitch!
It came with a big desk loaded with accesories and fancy presser feet. The drawers were chock full of vintage trims, zippers, and other sewing accoutrements. It even came with a nifty buttonholing attachment, which I have yet to figure out. To be honest, I  have yet to figure out any of the attachments.
But the machine and the table were maybe a little utilitarian for my taste? It doesn't quite go with my French Country decor. I was hoping for something more streamlined, and perhaps a less clunky sewing table.
Well ,Tom told me he would  cut the price in half and knew his mom's machine would be going to a good home if I bought it. That line works every time! Being the softie I am, and sensing a good deal, I was won over and brought it home.
My kids think she's rather plain, not sensing her inherent beauty yet. There she sits in my dining room. I think I'll call her Mabel..
Photobucket

24 comments:

  1. Congats to you and Mabel - May your love be long and faithful. She's a beaut!

    ReplyDelete
  2. She is beautiful, one day your kids will learn to appreciate her! I love the name too :)

    ReplyDelete
  3. Lovely, and it sounds like you are pleased with her stitches.

    ReplyDelete
  4. Mable is a beautiful ol' gal. I hope she gives you years of great stitches.

    ReplyDelete
  5. Mabel is beautiful. The kiddos don't know what they're talking about. ;-)

    ReplyDelete
  6. beautiful buy! I find it fantastic that you gave a new life to the machine. I actually find the stand quite cool...sort of 70s style

    ReplyDelete
  7. Nice! I really like the cabinet. Those are old workhorses. I have had a few Kenmores (can you say "sewing machine hoarder?") and currently do most of my sewing on a sixties model that I think is the BOMB. I hope she serves you well!

    ReplyDelete
  8. I LOVE your new old macine! And SNAP I just bought a vintage machine too! I wanted to get mine serviced before I use it. It is so exciting! I can't wait to see what you make with her! X

    ReplyDelete
  9. It's beautiful! I think, that if you don't like how it looks in it's current housing, that you should try some paint! A different color might make it fit in better with your decor, and give it a breath of fresh air!

    ReplyDelete
  10. My Mom had that exact machine and it never stopped running. She loved it. Although she eventually bought a newer machine she could never part with her older one. I never sewed on it, but I remember the knee pedal!

    ReplyDelete
  11. I've cut out a yellow gingham from a Collette pattern and will be taking Mabel out for a spin!

    ReplyDelete
  12. Your new old machine is lovely, have fun sewing on it.
    As for your sad Bernina, do you know about Tom Jenson? He services my industrials in my home and is a wonderful technician. I know he has a new storefront in downtown Oxnard. When you're ready if you want his number you can contact me via my website. nancy@sewballet.com

    ReplyDelete
  13. I recently purchased the same exact item at a Salvation Army and cannot figure out how to thread the upper thread. My old machine was a 1980s Singer...so I'm at a loss. I have a digital copy of the manual, but you love any advice you have!

    Erin

    ReplyDelete
  14. Erin,

    The vintagekemoresew Yahoo group has the manual in their files section. You can join the group and get lots of useful info.

    Foxye
    The Floribbean

    ReplyDelete
  15. I am happy you like your machine. I have mine in my garage now, but I grew up with this machine, in a desk just like yours, and used it for 50 years, until last year. I just got a brand new Husqvarna/Viking and will be retiring my Kenmore. I hope you have as many years with it as I have had. It still works like a charm. You can't beat the old machines for durability.

    ReplyDelete
  16. I just bought this EXACT machine and table at an Auction 2 days ago!!!

    It's equally as wonderful as you describe! It did take an hour to get it threaded - bobbin and all (yes I have the manual - no I don't read manuals! haha)

    We've replaced the electrical cord from the cabinet to the wall - and need to replace the "rubber" bushing from the motor to the wheel - have you replaced yours or have any tips?!

    Thanks!

    ReplyDelete
  17. I just bought this EXACT machine and table at an Auction 2 days ago!!!

    It's equally as wonderful as you describe! It did take an hour to get it threaded - bobbin and all (yes I have the manual - no I don't read manuals! haha)

    We've replaced the electrical cord from the cabinet to the wall - and need to replace the "rubber" bushing from the motor to the wheel - have you replaced yours or have any tips?!

    Thanks!

    ReplyDelete
  18. I just bought this EXACT machine and table at an Auction 2 days ago!!!

    It's equally as wonderful as you describe! It did take an hour to get it threaded - bobbin and all (yes I have the manual - no I don't read manuals! haha)

    We've replaced the electrical cord from the cabinet to the wall - and need to replace the "rubber" bushing from the motor to the wheel - have you replaced yours or have any tips?!

    Thanks!

    ReplyDelete
  19. Oh, I'm so jealous! I have to admit that I'm a little intimidated by older machines, but maybe I just need to do more research and keep my eyes open... very cool, especially with everything it came with!

    ReplyDelete
  20. I just purchased the same exact machine as well, but in a different cabinet. Apparently the presser foot won't go up and down, but was working fine a few weeks ago. Have you had any luck finding a parts supplier or good repair person? Or perhaps doing it yourself?

    Any advice for me in general? I'd love to send you pics of my cabinet :)

    Em

    ReplyDelete
  21. I just got the same machine in a different cabinet! My presser foot won't go up and down...any luck finding parts or repair people?

    I'd love to send you pics of my cabinet!

    Em

    ReplyDelete
  22. i have the exact machine but i can not figure out how to thread it and get it take my bobbin, can you help me please.. please email me at kimjo9@ymail.com

    ReplyDelete
  23. What a find. I have this very same one, it belonged to my grandmother, but I don't have a manual. do you have any suggestions where I might find a manual? if you do my email is serenity931@hotmail.com. Congrats on the treasure you found! It's beautiful!! :)

    ReplyDelete
  24. I think the name Mabel is perfect. You should continue this little blog about Mabel and your adventures together! :)

    ReplyDelete

Don't be shy! Your comments are really appreciated and fun for me to read! If you have a question I usually respond via e- mail which is easier for me, being a busy mom. Please don't leave anonymous comments, instead just put your name in the Name/ URL box if you don't have an account. Thanks.

Related Posts Plugin for WordPress, Blogger...