Image Map

Monday, September 2, 2013

Armchair Slipcover Tutorial: #Waverize

armchair slipcover tutorial
Recently Joann Fabrics asked me if I would like to participate in sewing something with their new line of Waverly Fabrics. They asked me to Waverize It. I think I can do that. Is this chair Waverized enough for y'all?
Waverize It is also a contest going on open to the general public on Joann's Facebook Page. Here is the link if you would like to learn more. The grand prize is 1,000 dollars! But that's not for us bloggers... darn. But maybe YOU can participate!
But I did get this fabric for free!(disclosure.)
armchair slipcover tutorial What Joann sent me was two yards of of this beautiful green and white bold print cotton by Waverly. It's from their Modern Essentials Line and it's called Fun Flore. Having a mom who was a drapery designer for 25 years, I am well aware of Waverly Fabrics and I like how they stay on top of trends, yet somehow also remain classic.
This poor little brown vinyl chair was a thrift shop find. I bought it over two years ago thinking I would make a slipcover for it but never got around to it. I would look at this sad little worn out chair sitting in my den and feel guilty because it was such an eyesore. I had been ignoring the poor little thing for too long. I actually tried to get rid of it once. But my 3 year old daughter found it in my "giveaway " shed and made me bring it back. I'm glad she did, because her little chair was perfect to makeover with the Waverly fabric. Sometimes I can be a little relentless with getting rid of things. Especially after watching Hoarders!

So now I am going to attempt to walk you through the steps I take when I make a slipcover. I'm not really the exact measuring type. I'm sort of an ADD Scattered type, and precise measurements aren't really my thing. But I can do it if I have to. For instance, I have been sizing some patterns and you need to be very precise there. I like slipcovers because I get to drape and draping is my preferred design method, NOT flat pattern making. That's probably why I have three dress forms. I equate draping with sculpture and art and flat pattern making with...well, math.

So here goes....

I draped a large piece of fabric to the back of my child's chair. This chair used up two yards of fabric.
The first piece to drape was this backrest above. I made sure my fabric was ON GRAIN and that I liked the pattern placement before I started pinning. I pinned from the top first, then started tucking in the bottom and corners.
I had some extra fabric bunching up in the top corners so I draped in a dart. I pinned the dart closed. Once the dart was pinned closed I marked it by tracing it with my pencil. So then when I later took off the slipcover piece, I could see where I would need to sew the dart along the dart fold lines.
Then I traced around all of the edges of my back piece with a pencil. This is how I made all of the pieces for my armchair slipcover. Draping, pinning, and tracing. Except for the square shaped part you sit on. Because that was a square and easy to measure.
I removed my fabric, unpinned my dart and traced the sewing lines on it with my ruler to straighten out my dart sewing lines up in the top corners up there. It's sort of hard to see my dart lines in this photo. Sorry! I then cut about 1/2 an inch all around the pencil tracing lines, adding my seam allowance.
Next, I measured the square shaped seat bottom. I cut out that pattern easy enough since it didn't require and draping.
I sewed a piece of fuchsia piping to the seat bottom for a little pop of color. This is a kids chair and needs to be fun!
 Next, it was time to drape my arm rest pieces. I started pinning from the bottom edges then wrapped the fabric up and around, making sure my fabric was still on grain.

Hmmm...can you see how my piece went off grain a little? I had to straighten that piece out.
So now I had four pieces cut out and ready to sew. First, I sewed the bottom back rest edge to the top of my square shaped seat bottom piece. Then I sewed those two bottom curvy corners of the the back rest to the the bottom curvy corners of the arm rest pieces. They were about an inch off, those two pieces, because I had draped them, so I just pinned the ease out.
If you need this project to be totally perfect you could always lay your draped fabric pieces down on paper, trace them to make pattern, and adjust all the seam lines so they match perfectly. If I was making more than one of these chairs or selling it, I would.
Next I draped the bottom piece that goes from the seat bottom to the bottom of the chair. I sewed that to the piped edge of seat bottom.
 The next step is to drape those little pieces above. I'm not sure what these pieces are called so I'll call them arm rest inserts.

Then I sewed piping to the edges of them.

 And sewed them to the chair. My bottom piece in the center was a little long so I had to trim it.
 The next step was to draft the back piece and sew it to the chair cover. I made the center a little wider as you can see so it would fit over the bulging armrests. I could have also sewn in a zipper along one edge to make it easy to put the slipcover on but it fit over the chair as is easy enough.
The last part was the bottom ruffle that covers the legs of the chair. I hardly had ANY fabric left so I had to cut out lots of little strips and sewed them together to make a strip that was double the circumference of the bottom of the chair.
 I have a habit of just sewing something without measuring how much fabric I will need. BUT my eye is practiced, and I have only come up short on one project so far recently, when I didn't have enough fabric for a sleeve. So unless you have a lot of experience sewing, you should always make sure you have enough fabric to finish a project before you start it.
 I hemmed the long ruffle strip, and pinned in the pleats just eyeballing them, them sewed them down. The whole project took about three hours. 
This is a project an intermediate sewist can do in a day. You will love making slipcovers !
From drab to fab!

18 comments:

  1. I love it. And you make it look simple but I know that it is a huge job. It was worth every second though because now it looks magnificent. Bravo!

    ReplyDelete
  2. Great tutorial and very nice slipcover!
    Greetings from Italy!
    Carmen

    ReplyDelete
  3. Seriously cute chair! Thanks for showing the process too, you make it look easy LOL
    x

    ReplyDelete
  4. Thank you for sharing the contest on Joann's Facebook page and the tutorial. The chair is lovely. I'm fairly new to sewing and it is amazing how far 2 yards of fabric can go! The chair is a beautiful use of the Waverly Fabric.

    ReplyDelete
  5. Justine, this chair is gorgeous..So proud that Gigi went and got it out of the throw away shed..Yea!! Your tutorial was excellent. and I love the line of fabric. Now , Gigi has a beautiful chair..

    ReplyDelete
  6. I love the Waverly fabric they sent you! & the piping you picked out! Your project turned out super cute! First time dropping by from @DearCreatives

    ReplyDelete
  7. I had that same chair when I was a child except mine was a bright blue!

    ReplyDelete
  8. Justine, you are SO clever! It blows my mind that you draped and calculated your way to such a pretty chair cover..wow!

    ReplyDelete
  9. Wow, that's so pretty! And your how-to makes it look totally doable.
    I've linked to it over at Craft Gossip:
    http://sewing.craftgossip.com/tutorial-diy-armchair-slipcover/2013/09/05/
    --Anne

    ReplyDelete
  10. You did a fabulous job. Question? You said you unpinned your darts when you took the fabric off the chair and cut with a seam allowance. Did you re-pin the darts? Got a little confused there.

    ReplyDelete
  11. Very good job! And fun fabric! I am putting off doing my couch. It is just an oversize chair basically. You have given me some inspiration to get closer to starting the project. Thanks so much!

    ReplyDelete
  12. Mi sillón me pide a gritos que me tome todo este increíble trabajo .
    Hasta le hizo tuberías!

    ReplyDelete
  13. Wow! Turned out amazing, and the fabric is wonderful!

    ReplyDelete

Don't be shy! Your comments are really appreciated and fun for me to read! If you have a question I usually respond via e- mail which is easier for me, being a busy mom. Please don't leave anonymous comments, instead just put your name in the Name/ URL box if you don't have an account. Thanks.

Related Posts Plugin for WordPress, Blogger...